Sql Backing up Tables: installed

Showing posts with label installed. Show all posts

Thursday, March 29, 2012

Backup fails with A nonrecoverable I/O error occurred for large DB

Hi,
We have just installed an Windows 2003 x64 server with SQL 2005 to replace
our old server. Everything seems to be working fine but the backup.
When trying to backup databases larger than 16MB or so the backup fails with
a System.Data.SqlClient.SqlError: A nonrecoverable I/O error occurred on file
"S:\SQLData\OLAPLogging.mdf:" 1(Incorrect function.).
(Microsoft.SqlServer.Smo) message:
Smaller DBs backup fine (master, model, etc). even if I create a new DB it
backups fine until it grows bigger than about 16MB, then it gives the same
error message.
In the eventlog I get 18210 events:
BackupIoRequest::WaitForIoCompletion: read failure on backup device
'S:\SQLData\OLAPLogging.mdf'. Operating system error 1(Incorrect function.).
Windows has latest hotfixes, latest disk drivers, tried disk caching
enabled/disabled, SQL 2005 without service pack as apps guy said no.
Hardware is DL585, 32GB of RAM, 1.4TB HP RA4100 external disk array.
Any suggestions what to try?
Thanks,
GergelySince you are getting a I/O error on drive S. Have you tried the same
backups on two or more different drives?
Ben Nevarez, MCDBA, OCP
Database Administrator
"G.Gardonyi" wrote:
> Hi,
> We have just installed an Windows 2003 x64 server with SQL 2005 to replace
> our old server. Everything seems to be working fine but the backup.
> When trying to backup databases larger than 16MB or so the backup fails with
> a System.Data.SqlClient.SqlError: A nonrecoverable I/O error occurred on file
> "S:\SQLData\OLAPLogging.mdf:" 1(Incorrect function.).
> (Microsoft.SqlServer.Smo) message:
> Smaller DBs backup fine (master, model, etc). even if I create a new DB it
> backups fine until it grows bigger than about 16MB, then it gives the same
> error message.
> In the eventlog I get 18210 events:
> BackupIoRequest::WaitForIoCompletion: read failure on backup device
> 'S:\SQLData\OLAPLogging.mdf'. Operating system error 1(Incorrect function.).
> Windows has latest hotfixes, latest disk drivers, tried disk caching
> enabled/disabled, SQL 2005 without service pack as apps guy said no.
> Hardware is DL585, 32GB of RAM, 1.4TB HP RA4100 external disk array.
> Any suggestions what to try?
> Thanks,
> Gergely|||Yes, same problem. Mind you it's the same external storage unit so can't rule
out some kind of HW problem. It's just weird that 'normal' operations are
running fine but when starting a backup it throws an error instantly.
"Ben Nevarez" wrote:
> Since you are getting a I/O error on drive S. Have you tried the same
> backups on two or more different drives?
> Ben Nevarez, MCDBA, OCP
> Database Administrator
>
> "G.Gardonyi" wrote:
> > Hi,
> >
> > We have just installed an Windows 2003 x64 server with SQL 2005 to replace
> > our old server. Everything seems to be working fine but the backup.
> > When trying to backup databases larger than 16MB or so the backup fails with
> > a System.Data.SqlClient.SqlError: A nonrecoverable I/O error occurred on file
> > "S:\SQLData\OLAPLogging.mdf:" 1(Incorrect function.).
> > (Microsoft.SqlServer.Smo) message:
> >
> > Smaller DBs backup fine (master, model, etc). even if I create a new DB it
> > backups fine until it grows bigger than about 16MB, then it gives the same
> > error message.
> >
> > In the eventlog I get 18210 events:
> > BackupIoRequest::WaitForIoCompletion: read failure on backup device
> > 'S:\SQLData\OLAPLogging.mdf'. Operating system error 1(Incorrect function.).
> >
> > Windows has latest hotfixes, latest disk drivers, tried disk caching
> > enabled/disabled, SQL 2005 without service pack as apps guy said no.
> > Hardware is DL585, 32GB of RAM, 1.4TB HP RA4100 external disk array.
> >
> > Any suggestions what to try?
> >
> > Thanks,
> > Gergely

Backup fails with A nonrecoverable I/O error occurred for large DB

Tuesday, March 27, 2012

backup failed

hey
Sql Server 2005
I have Sql Server 2005 installed on a server. Each night the Sql Server
Agent start a job. This job fails. I wonder what causing this job to fail.
I've checked in Event viewer and it doesn't say more than "the job failed,
the job was invoked by Schedule 2 (backup_db), the last step to run was 1
(subplan)"
Any ideas how to find what causing this? Could I manually start this Sql
Server Agent job and then see what causing the job to failed?
This job have been running for months, it's only during the last 3 days it
started to fail
Basically I want to fix this job so it get completed successfully, so I
thought knowing what causing it to fail could help solving the problem...
but the main thing is that I want the job to complete successfully
any suggestions?Jeff
Please specify an output file in the step of the job (Steps--Edit--Advanced)
and see what is going on
"Jeff" <donot@.spam.me> wrote in message
news:uhhzFYIQIHA.4444@.TK2MSFTNGP02.phx.gbl...
> hey
> Sql Server 2005
> I have Sql Server 2005 installed on a server. Each night the Sql Server
> Agent start a job. This job fails. I wonder what causing this job to fail.
> I've checked in Event viewer and it doesn't say more than "the job failed,
> the job was invoked by Schedule 2 (backup_db), the last step to run was 1
> (subplan)"
> Any ideas how to find what causing this? Could I manually start this Sql
> Server Agent job and then see what causing the job to failed?
> This job have been running for months, it's only during the last 3 days it
> started to fail
> Basically I want to fix this job so it get completed successfully, so I
> thought knowing what causing it to fail could help solving the problem...
> but the main thing is that I want the job to complete successfully
> any suggestions?
>
>|||Hi Jeff,
First check the job history information. Right-click your job, View History
and click the + sign to see the job steps.
Also, check the SQL Server error log for related error messages.
Hope this helps,
Ben Nevarez
Senior Database Administrator
AIG SunAmerica
"Jeff" wrote:
> hey
> Sql Server 2005
> I have Sql Server 2005 installed on a server. Each night the Sql Server
> Agent start a job. This job fails. I wonder what causing this job to fail.
> I've checked in Event viewer and it doesn't say more than "the job failed,
> the job was invoked by Schedule 2 (backup_db), the last step to run was 1
> (subplan)"
> Any ideas how to find what causing this? Could I manually start this Sql
> Server Agent job and then see what causing the job to failed?
> This job have been running for months, it's only during the last 3 days it
> started to fail
> Basically I want to fix this job so it get completed successfully, so I
> thought knowing what causing it to fail could help solving the problem...
> but the main thing is that I want the job to complete successfully
> any suggestions?
>
>|||Hi Jeff
It sounds like you are not looking at the steps in the job history. Also
check out the SQL Server error log to see if anything has been written.
Which version of SQL Server are you running (SELECT @.@.VERSION)? It sounds
like this job is from a maintenance plan, you could try dropping the plan and
re-creating it.
John
"Jeff" wrote:
> hey
> Sql Server 2005
> I have Sql Server 2005 installed on a server. Each night the Sql Server
> Agent start a job. This job fails. I wonder what causing this job to fail.
> I've checked in Event viewer and it doesn't say more than "the job failed,
> the job was invoked by Schedule 2 (backup_db), the last step to run was 1
> (subplan)"
> Any ideas how to find what causing this? Could I manually start this Sql
> Server Agent job and then see what causing the job to failed?
> This job have been running for months, it's only during the last 3 days it
> started to fail
> Basically I want to fix this job so it get completed successfully, so I
> thought knowing what causing it to fail could help solving the problem...
> but the main thing is that I want the job to complete successfully
> any suggestions?
>
>|||select @.@.version returned
Microsoft SQL Server 2005 - 9.00.2050.00 (Intel X86) Feb 13 2007 23:02:48
Copyright (c) 1988-2005 Microsoft Corporation Standard Edition on Windows
NT 5.2 (Build 3790: Service Pack 2)
Step history (View History) said "Executed as user: PC1\SYSTEM. The package
execution failed. The step failed"
I didn't find any info in the Sql Server Error Logs about this|||select @.@.version returned
Microsoft SQL Server 2005 - 9.00.2050.00 (Intel X86) Feb 13 2007 23:02:48
Copyright (c) 1988-2005 Microsoft Corporation Standard Edition on Windows
NT 5.2 (Build 3790: Service Pack 2)
Step history (View History) said "Executed as user: PC1\SYSTEM. The package
execution failed. The step failed"
I didn't find any info in the Sql Server Error Logs about this
any suggestions?|||In the Sql Server Error Log I found this info (this info was added to the
log about 3 seconds after the Job started):
Message
Configuration option 'user options' changed from 0 to 0. Run the RECONFIGURE
statement to install.
***
This info was added to the Sql Server Error Log about the time the error
occured
CHECKDB for database 'test_db' finished without errors on 2007-12-17
04:00:04.470 (local time). This is an informational message only; no user
action is required.
any suggestions?|||In the Sql Server Error Log I found this info (this info was added to the
log about 3 seconds after the Job started):
Message
Configuration option 'user options' changed from 0 to 0. Run the RECONFIGURE
statement to install.
***
This info was added to the Sql Server Error Log about the time the error
occured
CHECKDB for database 'test_db' finished without errors on 2007-12-17
04:00:04.470 (local time). This is an informational message only; no user
action is required.
any suggestions?|||In the the Log File Viewer, I select Maintenace Plan and there I see to rows
marked with a green icon and a + sign to the left... I clicked on the + to
reveal what's under the row.. then it revealed a row with an red stop icon
to the left...
On one of the rows with red stop icon, I read this error message:
Could not generate mail report.An exception occurred while executing a
Transact-SQL statement or batch.No global profile is configured. Specify a
profile name in the @.profile_name parameter.
any suggestions?|||Hi Jeff
It looks like it is having problems sending the email notification. Try
changing the maintenance plan to remove these. There is probably a notify
operator task that needs to be re-configured. Also check that you can send
test emails for database mail and SQL Agent mail configuration (in the
properties)
John
"Jeff" wrote:
> In the the Log File Viewer, I select Maintenace Plan and there I see to rows
> marked with a green icon and a + sign to the left... I clicked on the + to
> reveal what's under the row.. then it revealed a row with an red stop icon
> to the left...
> On one of the rows with red stop icon, I read this error message:
> Could not generate mail report.An exception occurred while executing a
> Transact-SQL statement or batch.No global profile is configured. Specify a
> profile name in the @.profile_name parameter.
> any suggestions?
>
>|||I modifyed the Maintenance Plan -> selected the Maintenance plan I selected
"Modify". then I opened the "Reporting and Logging" window and unchecked
"Send report to an email recipient". Maybe the error was here... the agent
operator set as recipient was an domain account which not exist anymore
It's a long time since this domain account was removed - strange if caused
problem for sqlserver now
I saved my modifications to the maintenance plan...
How do I manually test if this actually solved the problem'
Best Regards
Jeff|||Hi Jeff
It may be that the account had been disabled but the mailbox remained until
more recently!!
At least everything works now!
John
"Jeff" wrote:
> I modifyed the Maintenance Plan -> selected the Maintenance plan I selected
> "Modify". then I opened the "Reporting and Logging" window and unchecked
> "Send report to an email recipient". Maybe the error was here... the agent
> operator set as recipient was an domain account which not exist anymore
> It's a long time since this domain account was removed - strange if caused
> problem for sqlserver now
> I saved my modifications to the maintenance plan...
> How do I manually test if this actually solved the problem'
> Best Regards
> Jeff
>
>|||Right click on the maintanence plan and select Execute from the popup menu
and View History for that plan (by right clicking on it again...)
--
Ekrem Önsoy
"Jeff" <donot@.spam.me> wrote in message
news:eDsSQBLQIHA.4584@.TK2MSFTNGP03.phx.gbl...
>I modifyed the Maintenance Plan -> selected the Maintenance plan I selected
>"Modify". then I opened the "Reporting and Logging" window and unchecked
>"Send report to an email recipient". Maybe the error was here... the agent
>operator set as recipient was an domain account which not exist anymore
> It's a long time since this domain account was removed - strange if caused
> problem for sqlserver now
> I saved my modifications to the maintenance plan...
> How do I manually test if this actually solved the problem'
> Best Regards
> Jeff
>|||I tryed to execute the maintenace plan, but it failed... the second time I
tryed to execute it it gave me this error message:
Execute Maintenance Plan
An exception occured while executing a Transact-SQL statement or batch
(Microsoft.SqlServer.ConnectInfo)
SqlServerAgent Error: Request to run job backup_db (from <domain>\Jeff)
refused because the job is already running from a request by User
<domain>\Jeff (Microsft Sql Server, Error 22022)
I'm not sure how the first error message was (I tryed to execute the
maintenance plan twice)...
strange if I should get an error that the job is already running...
well, maybe it was caused by my user account, which not a member of the
local administrator on that server, but I'm a member of the administrators
in the domain
any suggestions?|||Hi
Did you try to execute the job or the maintenance plan? If you look at the
view history of the plan it may have something in for the last run, if it is
still running then it would be incomplete information.
John
"Jeff" wrote:
> I tryed to execute the maintenace plan, but it failed... the second time I
> tryed to execute it it gave me this error message:
> Execute Maintenance Plan
> An exception occured while executing a Transact-SQL statement or batch
> (Microsoft.SqlServer.ConnectInfo)
> SqlServerAgent Error: Request to run job backup_db (from <domain>\Jeff)
> refused because the job is already running from a request by User
> <domain>\Jeff (Microsft Sql Server, Error 22022)
> I'm not sure how the first error message was (I tryed to execute the
> maintenance plan twice)...
> strange if I should get an error that the job is already running...
> well, maybe it was caused by my user account, which not a member of the
> local administrator on that server, but I'm a member of the administrators
> in the domain
> any suggestions?
>
>|||It fails because as the error message refers it's already running. You
should check the history for any detailed error messages about the running
job if there is any.
--
Ekrem Önsoy
"Jeff" <donot@.spam.me> wrote in message
news:enncutLQIHA.5184@.TK2MSFTNGP05.phx.gbl...
>I tryed to execute the maintenace plan, but it failed... the second time I
>tryed to execute it it gave me this error message:
> Execute Maintenance Plan
> An exception occured while executing a Transact-SQL statement or batch
> (Microsoft.SqlServer.ConnectInfo)
> SqlServerAgent Error: Request to run job backup_db (from <domain>\Jeff)
> refused because the job is already running from a request by User
> <domain>\Jeff (Microsft Sql Server, Error 22022)
> I'm not sure how the first error message was (I tryed to execute the
> maintenance plan twice)...
> strange if I should get an error that the job is already running...
> well, maybe it was caused by my user account, which not a member of the
> local administrator on that server, but I'm a member of the administrators
> in the domain
> any suggestions?
>

backup failed

Sunday, March 25, 2012

Backup Exec broke my SQL!

I installed Symantec Backup Exec 11d on a new Windows 2003 Small Business
Server R1. I had many problems and after talking forever with Dell support,
I uninstalled Backup Exec "manually" (believe it or not, there's no other
way). This included downloading the Microsoft uninstaller and deleting
registry entries manually.
Now, when I try to reinstall Backup Exec, the installation fails when it
tries to install SQL. This is the installation log:
Symantec Backup Exec (TM) 11.0 for Windows Servers Installation Log
03-14-2007,22:09:46 : E:\WINNT\INSTALL\BE\setup.exe
03-14-2007,22:09:46 : CSetupApp::LoadSetupXML
03-14-2007,22:09:46 : CSetupApp::ScanXML
03-14-2007,22:09:46 : E:\WINNT\INSTALL\BE\Bin\Setup.xml
03-14-2007,22:09:46 : MSI File Name = WindowsInstaller-KB893803-v2-x86.exe
03-14-2007,22:09:46 : MSI Version = 3.1
03-14-2007,22:09:46 : MSI Package Name = Symantec Backup Exec for Windows
Servers.msi
03-14-2007,22:09:46 : System Central Processor = 86
03-14-2007,22:09:46 : Product Type = SETUP_BE
03-14-2007,22:09:46 : Product Name = Symantec Backup Exec for Windows Servers
03-14-2007,22:09:46 : Current Installing GUID
={BEA465C8-2923-42C6-9141-BE44739A6A80}
03-14-2007,22:09:46 : Product Version = 11.0
03-14-2007,22:09:46 : CSetupSupport::IsValidMSIPackage
03-14-2007,22:09:46 : E:\WINNT\INSTALL\BE\Symantec Backup Exec for Windows
Servers.msi
03-14-2007,22:09:48 : {BEA465C8-2923-42C6-9141-BE44739A6A80}
03-14-2007,22:09:48 : {BEA465C8-2923-42C6-9141-BE44739A6A80}
03-14-2007,22:09:48 : Equal PID
03-14-2007,22:09:50 : Product version: 11.0.6235
03-14-2007,22:09:51 : StartBESequence
03-14-2007,22:09:51 : Executing BE_PreCheckInstall
03-14-2007,22:09:51 : MDAC 2.82.1830.0 is installed on this system.
03-14-2007,22:09:51 : Executing BE_SetSQLxLangVersion. Setting language
version of SQL Express BKUPEXEC instance.
03-14-2007,22:09:51 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
03-14-2007,22:09:51 : MDAC 2.82.1830.0 is installed on this system.
03-14-2007,22:09:51 : Executing StartBESequence
03-14-2007,22:09:51 : Pulling user data from the MSI
03-14-2007,22:09:51 : Upgrade state set to 0
03-14-2007,22:09:51 : Executing SSO::PullDataMSI()
03-14-2007,22:09:51 : Executing TSM_GetTSMSettings.
03-14-2007,22:09:51 : Executing CDlgCAS::PullDataMSI()
03-14-2007,22:09:51 : /TS:
03-14-2007,22:09:51 : MSI processing complete
03-14-2007,22:09:51 : Pulling user data from the command line
03-14-2007,22:09:51 : COMMAND LINE: Checking UIMODE value
03-14-2007,22:09:51 : COMMAND LINE: Checking for program group placement
value
03-14-2007,22:09:51 : COMMAND LINE: Checking for main feature selection
03-14-2007,22:09:51 : COMMAND LINE: Checking for serialization values
03-14-2007,22:09:51 : CDlgChooseCustom::PullDataSilent
03-14-2007,22:09:51 : After check for parameter file exists.
03-14-2007,22:09:51 : CDlgLocalChooseCustom Pass Function.
03-14-2007,22:09:51 : After Check for INSTALL_CHOICE.
03-14-2007,22:09:51 : After Check for INSTALL_TYPE.
03-14-2007,22:09:51 : After Check for INSTALL_MODE.
03-14-2007,22:09:51 : CDlgLocalChooseCustom Pass Function.
03-14-2007,22:09:52 : InitData failed to open the cluster wrapper
03-14-2007,22:09:52 : InitData failed to open the cluster wrapper
03-14-2007,22:09:52 : COMMAND LINE: Checking for service account values
03-14-2007,22:09:52 : Not in Maintenance mode
03-14-2007,22:09:52 : Getting the Silent Params.
03-14-2007,22:09:52 : COMMAND LINE: checking for SSO values
03-14-2007,22:09:52 : COMMAND LINE: checking for DlgChooseDBServer values
03-14-2007,22:09:52 : COMMAND LINE: Checking for tape drivers values
03-14-2007,22:09:52 : COMMAND LINE: Checking for TSM values
03-14-2007,22:09:52 : CDlgTSMConfig Pass Function.
03-14-2007,22:09:52 : After Check for INSTALL_MODE.
03-14-2007,22:09:52 : CDlgTSMConfig Pass Function.
03-14-2007,22:09:52 : COMMAND LINE: checking for CASO values
03-14-2007,22:09:52 : COMMAND LINE: Checking for clone values
03-14-2007,22:09:52 : COMMAND LINE: Checking progress settings
03-14-2007,22:09:52 : COMMAND LINE: Checking for NOINSTALL value
03-14-2007,22:09:52 : Setup Command Line = "E:\WINNT\INSTALL\BE\setup.exe"
03-14-2007,22:09:52 : List of switches set follows:
03-14-2007,22:09:52 : /DEST: = C:\Program Files\Symantec\Backup Exec\
03-14-2007,22:09:52 : /TS:
03-14-2007,22:09:52 : Command line processing complete
03-14-2007,22:09:52 : Executing BEDiag utility
03-14-2007,22:09:52 : E:\WINNT\INSTALL\BE\Bin\Bediag.exe CORBETS1
/o:C:\DOCUME~1\ALLUSE~1\APPLIC~1\Symantec\BACKUP~1\Logs\Pre-Install_BEDiag.log
03-14-2007,22:09:52 : BEDiag utility has been launched in asynchronous
execution mode. Review
C:\DOCUME~1\ALLUSE~1\APPLIC~1\Symantec\BACKUP~1\Logs\Pre-Install_BEDiag.log
for results.
03-14-2007,22:09:52 : Install set to run in UI mode
03-14-2007,22:09:58 : Validating license data
03-14-2007,22:10:01 : InitData failed to open the cluster wrapper
03-14-2007,22:10:01 : m_bUseNativeClient = 1
03-14-2007,22:10:01 : Executing SQL_GetSQLServerEdition.
03-14-2007,22:10:01 : DRIVER={SQL Native
Client};SERVER=CORBETS1\SBSMONITORING;Trusted_Connection=Yes
03-14-2007,22:10:16 : V-225-206: Encryption not supported on the client.
Client unable to establish connection An error has occurred while
establishing a connection to the server. When connecting to SQL Server 2005,
this failure may be caused by the fact that under the default settings SQL
Server does not allow remote connections. ***To search for information about
this error, click here
03-14-2007,22:10:16 : V-225-226: Unable to connect to SQL Server. ***To
search for information about this error, click here
03-14-2007,22:10:16 : Executing SQL_GetSQLServerEdition.
03-14-2007,22:10:16 : DRIVER={SQL Native
Client};SERVER=CORBETS1\SHAREPOINT;Trusted_Connection=Yes
03-14-2007,22:10:27 : V-225-206: Encryption not supported on the client.
Client unable to establish connection An error has occurred while
establishing a connection to the server. When connecting to SQL Server 2005,
this failure may be caused by the fact that under the default settings SQL
Server does not allow remote connections. ***To search for information about
this error, click here
03-14-2007,22:10:27 : V-225-226: Unable to connect to SQL Server. ***To
search for information about this error, click here
03-14-2007,22:10:27 : Executing SQL_GetSQLServerEdition.
03-14-2007,22:10:27 : DRIVER={SQL Native
Client};SERVER=CORBETS1\WSUS;Trusted_Connection=Yes
03-14-2007,22:10:28 : V-225-206: Encryption not supported on the client.
Client unable to establish connection An error has occurred while
establishing a connection to the server. When connecting to SQL Server 2005,
this failure may be caused by the fact that under the default settings SQL
Server does not allow remote connections. ***To search for information about
this error, click here
03-14-2007,22:10:28 : V-225-226: Unable to connect to SQL Server. ***To
search for information about this error, click here
03-14-2007,22:10:52 : CDlgValidationSummary::ValidateData
03-14-2007,22:10:52 : CDlgSerialNumber Pass Function.
03-14-2007,22:10:52 : After Check for Remote_Install.
03-14-2007,22:10:52 : After Check for RA_INSTALL.
03-14-2007,22:10:55 : Validating serialization data
03-14-2007,22:10:56 : CDlgLocalChooseCustom Pass Function.
03-14-2007,22:10:56 : After Check for INSTALL_CHOICE.
03-14-2007,22:10:56 : After Check for INSTALL_TYPE.
03-14-2007,22:10:56 : After Check for INSTALL_MODE.
03-14-2007,22:10:56 : CDlgLocalChooseCustom Pass Function.
03-14-2007,22:10:56 : On Init of CDlgChooseCustom
03-14-2007,22:10:56 : Leaving Init of CDlgChooseCustom
03-14-2007,22:10:56 : CDlgLocalChooseCustom::OnInitDialog
03-14-2007,22:10:56 : On Init of CDlgLocalChooseCustom
03-14-2007,22:10:56 : InitData failed to open the cluster wrapper
03-14-2007,22:10:56 : InitData failed to open the cluster wrapper
03-14-2007,22:10:56 : Leaving Init of CDlgLocalChooseCustom
03-14-2007,22:11:01 : Validating Local Options Data
03-14-2007,22:11:01 : InitData failed to open the cluster wrapper
03-14-2007,22:11:01 : InitData failed to open the cluster wrapper
03-14-2007,22:11:01 : InitData failed to open the cluster wrapper
03-14-2007,22:11:01 : InitData failed to open the cluster wrapper
03-14-2007,22:11:11 : Validating service account data
03-14-2007,22:11:12 : CDlgSSO Pass Function.
03-14-2007,22:11:12 : After Check for INSTALL_MODE.
03-14-2007,22:11:12 : DlgChooseDBServer Pass Function.
03-14-2007,22:12:22 : Validating DlgChooseDBServer data
03-14-2007,22:12:39 : m_bUseNativeClient = 1
03-14-2007,22:14:12 : CDlgSSO Pass Function.
03-14-2007,22:14:12 : After Check for INSTALL_MODE.
03-14-2007,22:14:19 : Validating service account data
03-14-2007,22:14:19 : CDlgLocalChooseCustom Pass Function.
03-14-2007,22:14:19 : After Check for INSTALL_CHOICE.
03-14-2007,22:14:19 : After Check for INSTALL_TYPE.
03-14-2007,22:14:19 : After Check for INSTALL_MODE.
03-14-2007,22:14:19 : CDlgLocalChooseCustom Pass Function.
03-14-2007,22:14:21 : Validating Local Options Data
03-14-2007,22:14:21 : InitData failed to open the cluster wrapper
03-14-2007,22:14:21 : InitData failed to open the cluster wrapper
03-14-2007,22:14:21 : InitData failed to open the cluster wrapper
03-14-2007,22:14:21 : InitData failed to open the cluster wrapper
03-14-2007,22:14:23 : Validating service account data
03-14-2007,22:14:39 : CDlgSSO Pass Function.
03-14-2007,22:14:39 : After Check for INSTALL_MODE.
03-14-2007,22:14:39 : DlgChooseDBServer Pass Function.
03-14-2007,22:15:32 : Validating DlgChooseDBServer data
03-14-2007,22:15:32 : m_bUseNativeClient = 1
03-14-2007,22:15:32 : There is no MSSQL$BKUPEXEC Service
03-14-2007,22:15:32 : Unable to connect to a SQL Server CORBETS1\BKUPEXEC on
machine CORBETS1.
03-14-2007,22:16:39 : Validating DlgChooseDBServer data
03-14-2007,22:17:01 : Validating DlgChooseDBServer data
03-14-2007,22:17:01 : m_bUseNativeClient = 1
03-14-2007,22:17:01 : There is no MSSQL$BKUPEXEC Service
03-14-2007,22:17:01 : Unable to connect to a SQL Server CORBETS1\BKUPEXEC on
machine CORBETS1.
03-14-2007,22:23:17 : Validating DlgChooseDBServer data
03-14-2007,22:23:17 : Drive C: Required: 956 MB Available: 14445 MB
03-14-2007,22:23:17 : CDlgChooseTapeDrivers Pass Function.
03-14-2007,22:23:17 : After Check for INSTALL_MODE.
03-14-2007,22:23:17 : After Check for INSTALL_CHOICE.
03-14-2007,22:23:17 : After Check for INSTALL_TYPE.
03-14-2007,22:23:17 : CDlgSerialNumber Pass Function.
03-14-2007,22:23:28 : CDlgTSMConfig Pass Function.
03-14-2007,22:23:28 : After Check for INSTALL_MODE.
03-14-2007,22:23:28 : CDlgTSMConfig Pass Function.
03-14-2007,22:23:28 : CDlgCAS Pass Function.
03-14-2007,22:23:28 : After Check for INSTALL_MODE.
03-14-2007,22:23:28 : CDlgClone Pass Function.
03-14-2007,22:23:28 : CDlgClone not passed.
03-14-2007,22:23:28 : CDlgRemoteChooseCustom Pass Function.
03-14-2007,22:23:28 : After Check for INSTALL_CHOICE.
03-14-2007,22:23:28 : Install Summary XML File:
03-14-2007,22:23:28 :
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\1\{BEA465C8-2923-42C6-9141-BE44739A6A80}\InstallReview.xml
03-14-2007,22:23:28 : Install Summary XSL File:
03-14-2007,22:23:28 : E:\WINNT\INSTALL\BE\Bin\InstallSummary.xsl
03-14-2007,22:23:28 : Install Summary HTML File:
03-14-2007,22:23:28 :
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\1\{BEA465C8-2923-42C6-9141-BE44739A6A80}\InstallReview.htm
03-14-2007,22:23:28 : Entering GetSQLAndCASOInformation
03-14-2007,22:23:28 : Leaving GetSQLAndCASOInformation
03-14-2007,22:23:28 : MDAC 2.82.1830.0 is installed on this system.
03-14-2007,22:23:28 : m_bUseNativeClient = 1
03-14-2007,22:24:00 : Executing BE_InstallMDAC.
03-14-2007,22:24:00 : MDAC 2.82.1830.0 is installed on this system.
03-14-2007,22:24:05 : Installing .Net Framework 2.0.
03-14-2007,22:24:05 : .NET Framework was detected. Skipping install.
03-14-2007,22:24:06 : Installing Microsoft Report Viewer Redistributable 2005
03-14-2007,22:24:06 : m_bUseNativeClient = 1
03-14-2007,22:24:06 : Installing SQL Express 2005 BKUPEXEC instance.
03-14-2007,22:24:06 : "E:\WINNT\INSTALL\SQLExpress\SQLEXPR.exe" /wait /qn
/norestart /lv "C:\Program Files\Microsoft SQL Server\90\Setup
Bootstrap\LOG\Summary.txt" INSTANCENAME=BKUPEXEC INSTALLSQLDIR="C:\Program
Files\Microsoft SQL Server\" INSTALLSQLDATADIR="C:\Program Files\Microsoft
SQL Server\" INSTALLSQLSHAREDIR="C:\Program Files\Microsoft SQL Server\"
ADDLOCAL=SQL_Engine,SQL_Data_Files,SQL_Replication,Client_Components,Connectivity SAPWD=**** DISABLENETWORKPROTOCOLS=0
03-14-2007,22:25:09 : V-225-53: ERROR: Failed to install SQL Express
BKUPEXEC instance with error 1923. ***To search for information about this
error, click here
03-14-2007,22:25:10 : Please review C:\Program Files\Microsoft SQL
Server\90\Setup Bootstrap\LOG\Summary.txt for more details.
03-14-2007,22:25:10 : Failed to install third party products.
I get the impression I need to reinstall SQL server'
I installed using the administrator account. Thanks!!!It could be that the SQL Native Client got messed up. Try
reinstalling the SQL Native Client.
-Sue
On Fri, 23 Mar 2007 13:54:28 -0700, Just Guessing
<JustGuessing@.discussions.microsoft.com> wrote:
>I installed Symantec Backup Exec 11d on a new Windows 2003 Small Business
>Server R1. I had many problems and after talking forever with Dell support,
>I uninstalled Backup Exec "manually" (believe it or not, there's no other
>way). This included downloading the Microsoft uninstaller and deleting
>registry entries manually.
>Now, when I try to reinstall Backup Exec, the installation fails when it
>tries to install SQL. This is the installation log:
>Symantec Backup Exec (TM) 11.0 for Windows Servers Installation Log
>03-14-2007,22:09:46 : E:\WINNT\INSTALL\BE\setup.exe
>03-14-2007,22:09:46 : CSetupApp::LoadSetupXML
>03-14-2007,22:09:46 : CSetupApp::ScanXML
>03-14-2007,22:09:46 : E:\WINNT\INSTALL\BE\Bin\Setup.xml
>03-14-2007,22:09:46 : MSI File Name = WindowsInstaller-KB893803-v2-x86.exe
>03-14-2007,22:09:46 : MSI Version = 3.1
>03-14-2007,22:09:46 : MSI Package Name = Symantec Backup Exec for Windows
>Servers.msi
>03-14-2007,22:09:46 : System Central Processor = 86
>03-14-2007,22:09:46 : Product Type = SETUP_BE
>03-14-2007,22:09:46 : Product Name = Symantec Backup Exec for Windows Servers
>03-14-2007,22:09:46 : Current Installing GUID
>={BEA465C8-2923-42C6-9141-BE44739A6A80}
>03-14-2007,22:09:46 : Product Version = 11.0
>03-14-2007,22:09:46 : CSetupSupport::IsValidMSIPackage
>03-14-2007,22:09:46 : E:\WINNT\INSTALL\BE\Symantec Backup Exec for Windows
>Servers.msi
>03-14-2007,22:09:48 : {BEA465C8-2923-42C6-9141-BE44739A6A80}
>03-14-2007,22:09:48 : {BEA465C8-2923-42C6-9141-BE44739A6A80}
>03-14-2007,22:09:48 : Equal PID
>03-14-2007,22:09:50 : Product version: 11.0.6235
>03-14-2007,22:09:51 : StartBESequence
>03-14-2007,22:09:51 : Executing BE_PreCheckInstall
>03-14-2007,22:09:51 : MDAC 2.82.1830.0 is installed on this system.
>03-14-2007,22:09:51 : Executing BE_SetSQLxLangVersion. Setting language
>version of SQL Express BKUPEXEC instance.
>03-14-2007,22:09:51 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
>03-14-2007,22:09:51 : MDAC 2.82.1830.0 is installed on this system.
>03-14-2007,22:09:51 : Executing StartBESequence
>03-14-2007,22:09:51 : Pulling user data from the MSI
>03-14-2007,22:09:51 : Upgrade state set to 0
>03-14-2007,22:09:51 : Executing SSO::PullDataMSI()
>03-14-2007,22:09:51 : Executing TSM_GetTSMSettings.
>03-14-2007,22:09:51 : Executing CDlgCAS::PullDataMSI()
>03-14-2007,22:09:51 : /TS:
>03-14-2007,22:09:51 : MSI processing complete
>03-14-2007,22:09:51 : Pulling user data from the command line
>03-14-2007,22:09:51 : COMMAND LINE: Checking UIMODE value
>03-14-2007,22:09:51 : COMMAND LINE: Checking for program group placement
>value
>03-14-2007,22:09:51 : COMMAND LINE: Checking for main feature selection
>03-14-2007,22:09:51 : COMMAND LINE: Checking for serialization values
>03-14-2007,22:09:51 : CDlgChooseCustom::PullDataSilent
>03-14-2007,22:09:51 : After check for parameter file exists.
>03-14-2007,22:09:51 : CDlgLocalChooseCustom Pass Function.
>03-14-2007,22:09:51 : After Check for INSTALL_CHOICE.
>03-14-2007,22:09:51 : After Check for INSTALL_TYPE.
>03-14-2007,22:09:51 : After Check for INSTALL_MODE.
>03-14-2007,22:09:51 : CDlgLocalChooseCustom Pass Function.
>03-14-2007,22:09:52 : InitData failed to open the cluster wrapper
>03-14-2007,22:09:52 : InitData failed to open the cluster wrapper
>03-14-2007,22:09:52 : COMMAND LINE: Checking for service account values
>03-14-2007,22:09:52 : Not in Maintenance mode
>03-14-2007,22:09:52 : Getting the Silent Params.
>03-14-2007,22:09:52 : COMMAND LINE: checking for SSO values
>03-14-2007,22:09:52 : COMMAND LINE: checking for DlgChooseDBServer values
>03-14-2007,22:09:52 : COMMAND LINE: Checking for tape drivers values
>03-14-2007,22:09:52 : COMMAND LINE: Checking for TSM values
>03-14-2007,22:09:52 : CDlgTSMConfig Pass Function.
>03-14-2007,22:09:52 : After Check for INSTALL_MODE.
>03-14-2007,22:09:52 : CDlgTSMConfig Pass Function.
>03-14-2007,22:09:52 : COMMAND LINE: checking for CASO values
>03-14-2007,22:09:52 : COMMAND LINE: Checking for clone values
>03-14-2007,22:09:52 : COMMAND LINE: Checking progress settings
>03-14-2007,22:09:52 : COMMAND LINE: Checking for NOINSTALL value
>03-14-2007,22:09:52 : Setup Command Line = "E:\WINNT\INSTALL\BE\setup.exe"
>03-14-2007,22:09:52 : List of switches set follows:
>03-14-2007,22:09:52 : /DEST: = C:\Program Files\Symantec\Backup Exec\
>03-14-2007,22:09:52 : /TS:
>03-14-2007,22:09:52 : Command line processing complete
>03-14-2007,22:09:52 : Executing BEDiag utility
>03-14-2007,22:09:52 : E:\WINNT\INSTALL\BE\Bin\Bediag.exe CORBETS1
>/o:C:\DOCUME~1\ALLUSE~1\APPLIC~1\Symantec\BACKUP~1\Logs\Pre-Install_BEDiag.log
>03-14-2007,22:09:52 : BEDiag utility has been launched in asynchronous
>execution mode. Review
>C:\DOCUME~1\ALLUSE~1\APPLIC~1\Symantec\BACKUP~1\Logs\Pre-Install_BEDiag.log
>for results.
>03-14-2007,22:09:52 : Install set to run in UI mode
>03-14-2007,22:09:58 : Validating license data
>03-14-2007,22:10:01 : InitData failed to open the cluster wrapper
>03-14-2007,22:10:01 : m_bUseNativeClient = 1
>03-14-2007,22:10:01 : Executing SQL_GetSQLServerEdition.
>03-14-2007,22:10:01 : DRIVER={SQL Native
>Client};SERVER=CORBETS1\SBSMONITORING;Trusted_Connection=Yes
>03-14-2007,22:10:16 : V-225-206: Encryption not supported on the client.
>Client unable to establish connection An error has occurred while
>establishing a connection to the server. When connecting to SQL Server 2005,
>this failure may be caused by the fact that under the default settings SQL
>Server does not allow remote connections. ***To search for information about
>this error, click here
>03-14-2007,22:10:16 : V-225-226: Unable to connect to SQL Server. ***To
>search for information about this error, click here
>03-14-2007,22:10:16 : Executing SQL_GetSQLServerEdition.
>03-14-2007,22:10:16 : DRIVER={SQL Native
>Client};SERVER=CORBETS1\SHAREPOINT;Trusted_Connection=Yes
>03-14-2007,22:10:27 : V-225-206: Encryption not supported on the client.
>Client unable to establish connection An error has occurred while
>establishing a connection to the server. When connecting to SQL Server 2005,
>this failure may be caused by the fact that under the default settings SQL
>Server does not allow remote connections. ***To search for information about
>this error, click here
>03-14-2007,22:10:27 : V-225-226: Unable to connect to SQL Server. ***To
>search for information about this error, click here
>03-14-2007,22:10:27 : Executing SQL_GetSQLServerEdition.
>03-14-2007,22:10:27 : DRIVER={SQL Native
>Client};SERVER=CORBETS1\WSUS;Trusted_Connection=Yes
>03-14-2007,22:10:28 : V-225-206: Encryption not supported on the client.
>Client unable to establish connection An error has occurred while
>establishing a connection to the server. When connecting to SQL Server 2005,
>this failure may be caused by the fact that under the default settings SQL
>Server does not allow remote connections. ***To search for information about
>this error, click here
>03-14-2007,22:10:28 : V-225-226: Unable to connect to SQL Server. ***To
>search for information about this error, click here
>03-14-2007,22:10:52 : CDlgValidationSummary::ValidateData
>03-14-2007,22:10:52 : CDlgSerialNumber Pass Function.
>03-14-2007,22:10:52 : After Check for Remote_Install.
>03-14-2007,22:10:52 : After Check for RA_INSTALL.
>03-14-2007,22:10:55 : Validating serialization data
>03-14-2007,22:10:56 : CDlgLocalChooseCustom Pass Function.
>03-14-2007,22:10:56 : After Check for INSTALL_CHOICE.
>03-14-2007,22:10:56 : After Check for INSTALL_TYPE.
>03-14-2007,22:10:56 : After Check for INSTALL_MODE.
>03-14-2007,22:10:56 : CDlgLocalChooseCustom Pass Function.
>03-14-2007,22:10:56 : On Init of CDlgChooseCustom
>03-14-2007,22:10:56 : Leaving Init of CDlgChooseCustom
>03-14-2007,22:10:56 : CDlgLocalChooseCustom::OnInitDialog
>03-14-2007,22:10:56 : On Init of CDlgLocalChooseCustom
>03-14-2007,22:10:56 : InitData failed to open the cluster wrapper
>03-14-2007,22:10:56 : InitData failed to open the cluster wrapper
>03-14-2007,22:10:56 : Leaving Init of CDlgLocalChooseCustom
>03-14-2007,22:11:01 : Validating Local Options Data
>03-14-2007,22:11:01 : InitData failed to open the cluster wrapper
>03-14-2007,22:11:01 : InitData failed to open the cluster wrapper
>03-14-2007,22:11:01 : InitData failed to open the cluster wrapper
>03-14-2007,22:11:01 : InitData failed to open the cluster wrapper
>03-14-2007,22:11:11 : Validating service account data
>03-14-2007,22:11:12 : CDlgSSO Pass Function.
>03-14-2007,22:11:12 : After Check for INSTALL_MODE.
>03-14-2007,22:11:12 : DlgChooseDBServer Pass Function.
>03-14-2007,22:12:22 : Validating DlgChooseDBServer data
>03-14-2007,22:12:39 : m_bUseNativeClient = 1
>03-14-2007,22:14:12 : CDlgSSO Pass Function.
>03-14-2007,22:14:12 : After Check for INSTALL_MODE.
>03-14-2007,22:14:19 : Validating service account data
>03-14-2007,22:14:19 : CDlgLocalChooseCustom Pass Function.
>03-14-2007,22:14:19 : After Check for INSTALL_CHOICE.
>03-14-2007,22:14:19 : After Check for INSTALL_TYPE.
>03-14-2007,22:14:19 : After Check for INSTALL_MODE.
>03-14-2007,22:14:19 : CDlgLocalChooseCustom Pass Function.
>03-14-2007,22:14:21 : Validating Local Options Data
>03-14-2007,22:14:21 : InitData failed to open the cluster wrapper
>03-14-2007,22:14:21 : InitData failed to open the cluster wrapper
>03-14-2007,22:14:21 : InitData failed to open the cluster wrapper
>03-14-2007,22:14:21 : InitData failed to open the cluster wrapper
>03-14-2007,22:14:23 : Validating service account data
>03-14-2007,22:14:39 : CDlgSSO Pass Function.
>03-14-2007,22:14:39 : After Check for INSTALL_MODE.
>03-14-2007,22:14:39 : DlgChooseDBServer Pass Function.
>03-14-2007,22:15:32 : Validating DlgChooseDBServer data
>03-14-2007,22:15:32 : m_bUseNativeClient = 1
>03-14-2007,22:15:32 : There is no MSSQL$BKUPEXEC Service
>03-14-2007,22:15:32 : Unable to connect to a SQL Server CORBETS1\BKUPEXEC on
>machine CORBETS1.
>03-14-2007,22:16:39 : Validating DlgChooseDBServer data
>03-14-2007,22:17:01 : Validating DlgChooseDBServer data
>03-14-2007,22:17:01 : m_bUseNativeClient = 1
>03-14-2007,22:17:01 : There is no MSSQL$BKUPEXEC Service
>03-14-2007,22:17:01 : Unable to connect to a SQL Server CORBETS1\BKUPEXEC on
>machine CORBETS1.
>03-14-2007,22:23:17 : Validating DlgChooseDBServer data
>03-14-2007,22:23:17 : Drive C: Required: 956 MB Available: 14445 MB
>03-14-2007,22:23:17 : CDlgChooseTapeDrivers Pass Function.
>03-14-2007,22:23:17 : After Check for INSTALL_MODE.
>03-14-2007,22:23:17 : After Check for INSTALL_CHOICE.
>03-14-2007,22:23:17 : After Check for INSTALL_TYPE.
>03-14-2007,22:23:17 : CDlgSerialNumber Pass Function.
>03-14-2007,22:23:28 : CDlgTSMConfig Pass Function.
>03-14-2007,22:23:28 : After Check for INSTALL_MODE.
>03-14-2007,22:23:28 : CDlgTSMConfig Pass Function.
>03-14-2007,22:23:28 : CDlgCAS Pass Function.
>03-14-2007,22:23:28 : After Check for INSTALL_MODE.
>03-14-2007,22:23:28 : CDlgClone Pass Function.
>03-14-2007,22:23:28 : CDlgClone not passed.
>03-14-2007,22:23:28 : CDlgRemoteChooseCustom Pass Function.
>03-14-2007,22:23:28 : After Check for INSTALL_CHOICE.
>03-14-2007,22:23:28 : Install Summary XML File:
>03-14-2007,22:23:28 :
>C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\1\{BEA465C8-2923-42C6-9141-BE44739A6A80}\InstallReview.xml
>03-14-2007,22:23:28 : Install Summary XSL File:
>03-14-2007,22:23:28 : E:\WINNT\INSTALL\BE\Bin\InstallSummary.xsl
>03-14-2007,22:23:28 : Install Summary HTML File:
>03-14-2007,22:23:28 :
>C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\1\{BEA465C8-2923-42C6-9141-BE44739A6A80}\InstallReview.htm
>03-14-2007,22:23:28 : Entering GetSQLAndCASOInformation
>03-14-2007,22:23:28 : Leaving GetSQLAndCASOInformation
>03-14-2007,22:23:28 : MDAC 2.82.1830.0 is installed on this system.
>03-14-2007,22:23:28 : m_bUseNativeClient = 1
>03-14-2007,22:24:00 : Executing BE_InstallMDAC.
>03-14-2007,22:24:00 : MDAC 2.82.1830.0 is installed on this system.
>03-14-2007,22:24:05 : Installing .Net Framework 2.0.
>03-14-2007,22:24:05 : .NET Framework was detected. Skipping install.
>03-14-2007,22:24:06 : Installing Microsoft Report Viewer Redistributable 2005
>03-14-2007,22:24:06 : m_bUseNativeClient = 1
>03-14-2007,22:24:06 : Installing SQL Express 2005 BKUPEXEC instance.
>03-14-2007,22:24:06 : "E:\WINNT\INSTALL\SQLExpress\SQLEXPR.exe" /wait /qn
>/norestart /lv "C:\Program Files\Microsoft SQL Server\90\Setup
>Bootstrap\LOG\Summary.txt" INSTANCENAME=BKUPEXEC INSTALLSQLDIR="C:\Program
>Files\Microsoft SQL Server\" INSTALLSQLDATADIR="C:\Program Files\Microsoft
>SQL Server\" INSTALLSQLSHAREDIR="C:\Program Files\Microsoft SQL Server\"
>ADDLOCAL=SQL_Engine,SQL_Data_Files,SQL_Replication,Client_Components,Connectivity SAPWD=**** DISABLENETWORKPROTOCOLS=0
>03-14-2007,22:25:09 : V-225-53: ERROR: Failed to install SQL Express
>BKUPEXEC instance with error 1923. ***To search for information about this
>error, click here
>03-14-2007,22:25:10 : Please review C:\Program Files\Microsoft SQL
>Server\90\Setup Bootstrap\LOG\Summary.txt for more details.
>03-14-2007,22:25:10 : Failed to install third party products.
>I get the impression I need to reinstall SQL server'
>I installed using the administrator account. Thanks!!!
>
>
>|||Thanks for the reply. I have not been able to find anything about that in
the Microsoft KB. Do you have any links you could send me on doing that?
Thanks!
"Sue Hoegemeier" wrote:
> It could be that the SQL Native Client got messed up. Try
> reinstalling the SQL Native Client.
> -Sue
> On Fri, 23 Mar 2007 13:54:28 -0700, Just Guessing
> <JustGuessing@.discussions.microsoft.com> wrote:
> >I installed Symantec Backup Exec 11d on a new Windows 2003 Small Business
> >Server R1. I had many problems and after talking forever with Dell support,
> >I uninstalled Backup Exec "manually" (believe it or not, there's no other
> >way). This included downloading the Microsoft uninstaller and deleting
> >registry entries manually.
> >
> >Now, when I try to reinstall Backup Exec, the installation fails when it
> >tries to install SQL. This is the installation log:
> >
> >Symantec Backup Exec (TM) 11.0 for Windows Servers Installation Log
> >
> >03-14-2007,22:09:46 : E:\WINNT\INSTALL\BE\setup.exe
> >03-14-2007,22:09:46 : CSetupApp::LoadSetupXML
> >03-14-2007,22:09:46 : CSetupApp::ScanXML
> >03-14-2007,22:09:46 : E:\WINNT\INSTALL\BE\Bin\Setup.xml
> >03-14-2007,22:09:46 : MSI File Name = WindowsInstaller-KB893803-v2-x86.exe
> >03-14-2007,22:09:46 : MSI Version = 3.1
> >03-14-2007,22:09:46 : MSI Package Name = Symantec Backup Exec for Windows
> >Servers.msi
> >03-14-2007,22:09:46 : System Central Processor = 86
> >03-14-2007,22:09:46 : Product Type = SETUP_BE
> >03-14-2007,22:09:46 : Product Name = Symantec Backup Exec for Windows Servers
> >03-14-2007,22:09:46 : Current Installing GUID
> >={BEA465C8-2923-42C6-9141-BE44739A6A80}
> >03-14-2007,22:09:46 : Product Version = 11.0
> >03-14-2007,22:09:46 : CSetupSupport::IsValidMSIPackage
> >03-14-2007,22:09:46 : E:\WINNT\INSTALL\BE\Symantec Backup Exec for Windows
> >Servers.msi
> >03-14-2007,22:09:48 : {BEA465C8-2923-42C6-9141-BE44739A6A80}
> >03-14-2007,22:09:48 : {BEA465C8-2923-42C6-9141-BE44739A6A80}
> >03-14-2007,22:09:48 : Equal PID
> >03-14-2007,22:09:50 : Product version: 11.0.6235
> >03-14-2007,22:09:51 : StartBESequence
> >03-14-2007,22:09:51 : Executing BE_PreCheckInstall
> >03-14-2007,22:09:51 : MDAC 2.82.1830.0 is installed on this system.
> >03-14-2007,22:09:51 : Executing BE_SetSQLxLangVersion. Setting language
> >version of SQL Express BKUPEXEC instance.
> >03-14-2007,22:09:51 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
> >03-14-2007,22:09:51 : MDAC 2.82.1830.0 is installed on this system.
> >03-14-2007,22:09:51 : Executing StartBESequence
> >03-14-2007,22:09:51 : Pulling user data from the MSI
> >03-14-2007,22:09:51 : Upgrade state set to 0
> >03-14-2007,22:09:51 : Executing SSO::PullDataMSI()
> >03-14-2007,22:09:51 : Executing TSM_GetTSMSettings.
> >03-14-2007,22:09:51 : Executing CDlgCAS::PullDataMSI()
> >03-14-2007,22:09:51 : /TS:
> >03-14-2007,22:09:51 : MSI processing complete
> >03-14-2007,22:09:51 : Pulling user data from the command line
> >03-14-2007,22:09:51 : COMMAND LINE: Checking UIMODE value
> >03-14-2007,22:09:51 : COMMAND LINE: Checking for program group placement
> >value
> >03-14-2007,22:09:51 : COMMAND LINE: Checking for main feature selection
> >03-14-2007,22:09:51 : COMMAND LINE: Checking for serialization values
> >03-14-2007,22:09:51 : CDlgChooseCustom::PullDataSilent
> >03-14-2007,22:09:51 : After check for parameter file exists.
> >03-14-2007,22:09:51 : CDlgLocalChooseCustom Pass Function.
> >03-14-2007,22:09:51 : After Check for INSTALL_CHOICE.
> >03-14-2007,22:09:51 : After Check for INSTALL_TYPE.
> >03-14-2007,22:09:51 : After Check for INSTALL_MODE.
> >03-14-2007,22:09:51 : CDlgLocalChooseCustom Pass Function.
> >03-14-2007,22:09:52 : InitData failed to open the cluster wrapper
> >03-14-2007,22:09:52 : InitData failed to open the cluster wrapper
> >03-14-2007,22:09:52 : COMMAND LINE: Checking for service account values
> >03-14-2007,22:09:52 : Not in Maintenance mode
> >03-14-2007,22:09:52 : Getting the Silent Params.
> >03-14-2007,22:09:52 : COMMAND LINE: checking for SSO values
> >03-14-2007,22:09:52 : COMMAND LINE: checking for DlgChooseDBServer values
> >03-14-2007,22:09:52 : COMMAND LINE: Checking for tape drivers values
> >03-14-2007,22:09:52 : COMMAND LINE: Checking for TSM values
> >03-14-2007,22:09:52 : CDlgTSMConfig Pass Function.
> >03-14-2007,22:09:52 : After Check for INSTALL_MODE.
> >03-14-2007,22:09:52 : CDlgTSMConfig Pass Function.
> >03-14-2007,22:09:52 : COMMAND LINE: checking for CASO values
> >03-14-2007,22:09:52 : COMMAND LINE: Checking for clone values
> >03-14-2007,22:09:52 : COMMAND LINE: Checking progress settings
> >03-14-2007,22:09:52 : COMMAND LINE: Checking for NOINSTALL value
> >03-14-2007,22:09:52 : Setup Command Line = "E:\WINNT\INSTALL\BE\setup.exe"
> >03-14-2007,22:09:52 : List of switches set follows:
> >03-14-2007,22:09:52 : /DEST: = C:\Program Files\Symantec\Backup Exec\
> >03-14-2007,22:09:52 : /TS:
> >03-14-2007,22:09:52 : Command line processing complete
> >03-14-2007,22:09:52 : Executing BEDiag utility
> >03-14-2007,22:09:52 : E:\WINNT\INSTALL\BE\Bin\Bediag.exe CORBETS1
> >/o:C:\DOCUME~1\ALLUSE~1\APPLIC~1\Symantec\BACKUP~1\Logs\Pre-Install_BEDiag.log
> >03-14-2007,22:09:52 : BEDiag utility has been launched in asynchronous
> >execution mode. Review
> >C:\DOCUME~1\ALLUSE~1\APPLIC~1\Symantec\BACKUP~1\Logs\Pre-Install_BEDiag.log
> >for results.
> >03-14-2007,22:09:52 : Install set to run in UI mode
> >03-14-2007,22:09:58 : Validating license data
> >03-14-2007,22:10:01 : InitData failed to open the cluster wrapper
> >03-14-2007,22:10:01 : m_bUseNativeClient = 1
> >03-14-2007,22:10:01 : Executing SQL_GetSQLServerEdition.
> >03-14-2007,22:10:01 : DRIVER={SQL Native
> >Client};SERVER=CORBETS1\SBSMONITORING;Trusted_Connection=Yes
> >03-14-2007,22:10:16 : V-225-206: Encryption not supported on the client.
> >Client unable to establish connection An error has occurred while
> >establishing a connection to the server. When connecting to SQL Server 2005,
> >this failure may be caused by the fact that under the default settings SQL
> >Server does not allow remote connections. ***To search for information about
> >this error, click here
> >03-14-2007,22:10:16 : V-225-226: Unable to connect to SQL Server. ***To
> >search for information about this error, click here
> >03-14-2007,22:10:16 : Executing SQL_GetSQLServerEdition.
> >03-14-2007,22:10:16 : DRIVER={SQL Native
> >Client};SERVER=CORBETS1\SHAREPOINT;Trusted_Connection=Yes
> >03-14-2007,22:10:27 : V-225-206: Encryption not supported on the client.
> >Client unable to establish connection An error has occurred while
> >establishing a connection to the server. When connecting to SQL Server 2005,
> >this failure may be caused by the fact that under the default settings SQL
> >Server does not allow remote connections. ***To search for information about
> >this error, click here
> >03-14-2007,22:10:27 : V-225-226: Unable to connect to SQL Server. ***To
> >search for information about this error, click here
> >03-14-2007,22:10:27 : Executing SQL_GetSQLServerEdition.
> >03-14-2007,22:10:27 : DRIVER={SQL Native
> >Client};SERVER=CORBETS1\WSUS;Trusted_Connection=Yes
> >03-14-2007,22:10:28 : V-225-206: Encryption not supported on the client.
> >Client unable to establish connection An error has occurred while
> >establishing a connection to the server. When connecting to SQL Server 2005,
> >this failure may be caused by the fact that under the default settings SQL
> >Server does not allow remote connections. ***To search for information about
> >this error, click here
> >03-14-2007,22:10:28 : V-225-226: Unable to connect to SQL Server. ***To
> >search for information about this error, click here
> >03-14-2007,22:10:52 : CDlgValidationSummary::ValidateData
> >03-14-2007,22:10:52 : CDlgSerialNumber Pass Function.
> >03-14-2007,22:10:52 : After Check for Remote_Install.
> >03-14-2007,22:10:52 : After Check for RA_INSTALL.
> >03-14-2007,22:10:55 : Validating serialization data
> >03-14-2007,22:10:56 : CDlgLocalChooseCustom Pass Function.
> >03-14-2007,22:10:56 : After Check for INSTALL_CHOICE.
> >03-14-2007,22:10:56 : After Check for INSTALL_TYPE.
> >03-14-2007,22:10:56 : After Check for INSTALL_MODE.
> >03-14-2007,22:10:56 : CDlgLocalChooseCustom Pass Function.
> >03-14-2007,22:10:56 : On Init of CDlgChooseCustom
> >03-14-2007,22:10:56 : Leaving Init of CDlgChooseCustom
> >03-14-2007,22:10:56 : CDlgLocalChooseCustom::OnInitDialog
> >03-14-2007,22:10:56 : On Init of CDlgLocalChooseCustom
> >03-14-2007,22:10:56 : InitData failed to open the cluster wrapper
> >03-14-2007,22:10:56 : InitData failed to open the cluster wrapper
> >03-14-2007,22:10:56 : Leaving Init of CDlgLocalChooseCustom
> >03-14-2007,22:11:01 : Validating Local Options Data
> >03-14-2007,22:11:01 : InitData failed to open the cluster wrapper
> >03-14-2007,22:11:01 : InitData failed to open the cluster wrapper
> >03-14-2007,22:11:01 : InitData failed to open the cluster wrapper
> >03-14-2007,22:11:01 : InitData failed to open the cluster wrapper
> >03-14-2007,22:11:11 : Validating service account data
> >03-14-2007,22:11:12 : CDlgSSO Pass Function.
> >03-14-2007,22:11:12 : After Check for INSTALL_MODE.
> >03-14-2007,22:11:12 : DlgChooseDBServer Pass Function.
> >03-14-2007,22:12:22 : Validating DlgChooseDBServer data
> >03-14-2007,22:12:39 : m_bUseNativeClient = 1
> >03-14-2007,22:14:12 : CDlgSSO Pass Function.
> >03-14-2007,22:14:12 : After Check for INSTALL_MODE.
> >03-14-2007,22:14:19 : Validating service account data
> >03-14-2007,22:14:19 : CDlgLocalChooseCustom Pass Function.
> >03-14-2007,22:14:19 : After Check for INSTALL_CHOICE.
> >03-14-2007,22:14:19 : After Check for INSTALL_TYPE.
> >03-14-2007,22:14:19 : After Check for INSTALL_MODE.
> >03-14-2007,22:14:19 : CDlgLocalChooseCustom Pass Function.
> >03-14-2007,22:14:21 : Validating Local Options Data
> >03-14-2007,22:14:21 : InitData failed to open the cluster wrapper
> >03-14-2007,22:14:21 : InitData failed to open the cluster wrapper
> >03-14-2007,22:14:21 : InitData failed to open the cluster wrapper
> >03-14-2007,22:14:21 : InitData failed to open the cluster wrapper
> >03-14-2007,22:14:23 : Validating service account data
> >03-14-2007,22:14:39 : CDlgSSO Pass Function.
> >03-14-2007,22:14:39 : After Check for INSTALL_MODE.
> >03-14-2007,22:14:39 : DlgChooseDBServer Pass Function.
> >03-14-2007,22:15:32 : Validating DlgChooseDBServer data
> >03-14-2007,22:15:32 : m_bUseNativeClient = 1
> >03-14-2007,22:15:32 : There is no MSSQL$BKUPEXEC Service
> >03-14-2007,22:15:32 : Unable to connect to a SQL Server CORBETS1\BKUPEXEC on
> >machine CORBETS1.
> >03-14-2007,22:16:39 : Validating DlgChooseDBServer data
> >03-14-2007,22:17:01 : Validating DlgChooseDBServer data
> >03-14-2007,22:17:01 : m_bUseNativeClient = 1
> >03-14-2007,22:17:01 : There is no MSSQL$BKUPEXEC Service
> >03-14-2007,22:17:01 : Unable to connect to a SQL Server CORBETS1\BKUPEXEC on
> >machine CORBETS1.
> >03-14-2007,22:23:17 : Validating DlgChooseDBServer data
> >03-14-2007,22:23:17 : Drive C: Required: 956 MB Available: 14445 MB
> >03-14-2007,22:23:17 : CDlgChooseTapeDrivers Pass Function.
> >03-14-2007,22:23:17 : After Check for INSTALL_MODE.
> >03-14-2007,22:23:17 : After Check for INSTALL_CHOICE.
> >03-14-2007,22:23:17 : After Check for INSTALL_TYPE.
> >03-14-2007,22:23:17 : CDlgSerialNumber Pass Function.
> >03-14-2007,22:23:28 : CDlgTSMConfig Pass Function.
> >03-14-2007,22:23:28 : After Check for INSTALL_MODE.
> >03-14-2007,22:23:28 : CDlgTSMConfig Pass Function.
> >03-14-2007,22:23:28 : CDlgCAS Pass Function.
> >03-14-2007,22:23:28 : After Check for INSTALL_MODE.
> >03-14-2007,22:23:28 : CDlgClone Pass Function.
> >03-14-2007,22:23:28 : CDlgClone not passed.
> >03-14-2007,22:23:28 : CDlgRemoteChooseCustom Pass Function.
> >03-14-2007,22:23:28 : After Check for INSTALL_CHOICE.
> >03-14-2007,22:23:28 : Install Summary XML File:
> >03-14-2007,22:23:28 :
> >C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\1\{BEA465C8-2923-42C6-9141-BE44739A6A80}\InstallReview.xml
> >03-14-2007,22:23:28 : Install Summary XSL File:
> >03-14-2007,22:23:28 : E:\WINNT\INSTALL\BE\Bin\InstallSummary.xsl
> >03-14-2007,22:23:28 : Install Summary HTML File:
> >03-14-2007,22:23:28 :
> >C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\1\{BEA465C8-2923-42C6-9141-BE44739A6A80}\InstallReview.htm
> >03-14-2007,22:23:28 : Entering GetSQLAndCASOInformation
> >03-14-2007,22:23:28 : Leaving GetSQLAndCASOInformation
> >03-14-2007,22:23:28 : MDAC 2.82.1830.0 is installed on this system.
> >03-14-2007,22:23:28 : m_bUseNativeClient = 1
> >03-14-2007,22:24:00 : Executing BE_InstallMDAC.
> >03-14-2007,22:24:00 : MDAC 2.82.1830.0 is installed on this system.
> >03-14-2007,22:24:05 : Installing .Net Framework 2.0.
> >03-14-2007,22:24:05 : .NET Framework was detected. Skipping install.
> >03-14-2007,22:24:06 : Installing Microsoft Report Viewer Redistributable 2005
> >03-14-2007,22:24:06 : m_bUseNativeClient = 1
> >03-14-2007,22:24:06 : Installing SQL Express 2005 BKUPEXEC instance.
> >03-14-2007,22:24:06 : "E:\WINNT\INSTALL\SQLExpress\SQLEXPR.exe" /wait /qn
> >/norestart /lv "C:\Program Files\Microsoft SQL Server\90\Setup
> >Bootstrap\LOG\Summary.txt" INSTANCENAME=BKUPEXEC INSTALLSQLDIR="C:\Program
> >Files\Microsoft SQL Server\" INSTALLSQLDATADIR="C:\Program Files\Microsoft
> >SQL Server\" INSTALLSQLSHAREDIR="C:\Program Files\Microsoft SQL Server\"
> >ADDLOCAL=SQL_Engine,SQL_Data_Files,SQL_Replication,Client_Components,Connectivity SAPWD=**** DISABLENETWORKPROTOCOLS=0
> >03-14-2007,22:25:09 : V-225-53: ERROR: Failed to install SQL Express
> >BKUPEXEC instance with error 1923. ***To search for information about this
> >error, click here
> >03-14-2007,22:25:10 : Please review C:\Program Files\Microsoft SQL
> >Server\90\Setup Bootstrap\LOG\Summary.txt for more details.
> >03-14-2007,22:25:10 : Failed to install third party products.
> >
> >I get the impression I need to reinstall SQL server'
> >
> >I installed using the administrator account. Thanks!!!
> >
> >
> >
> >
> >
>|||I'm having the EXACT same issue. A brand new install of BE 11d SBS Ed
on my client's brand new Win 2k3 SBS R2 server got hosed and jobs in
it refused to run at all. I finally got BE uninstalled by temporarily
disabling SAV and stopping all of its processes after the uninstall
and repair install would not run normally. Now I get the same error
you listed when I try to install BE back onto the server. Please let
me know if you find an answer to this. I'm calling Symantec and
Microsoft later today about this if not.|||You could try a repair from the Add/Remove Programs - it's
listed under SQL Server Native Client.
Or the installer is sqlncli.msi. It's on the installation
CD.
-Sue
On Tue, 27 Mar 2007 18:12:40 -0700, Just Guessing
<JustGuessing@.discussions.microsoft.com> wrote:
>Thanks for the reply. I have not been able to find anything about that in
>the Microsoft KB. Do you have any links you could send me on doing that?
>Thanks!
>"Sue Hoegemeier" wrote:
>> It could be that the SQL Native Client got messed up. Try
>> reinstalling the SQL Native Client.
>> -Sue
>> On Fri, 23 Mar 2007 13:54:28 -0700, Just Guessing
>> <JustGuessing@.discussions.microsoft.com> wrote:
>> >I installed Symantec Backup Exec 11d on a new Windows 2003 Small Business
>> >Server R1. I had many problems and after talking forever with Dell support,
>> >I uninstalled Backup Exec "manually" (believe it or not, there's no other
>> >way). This included downloading the Microsoft uninstaller and deleting
>> >registry entries manually.
>> >
>> >Now, when I try to reinstall Backup Exec, the installation fails when it
>> >tries to install SQL. This is the installation log:
>> >
>> >Symantec Backup Exec (TM) 11.0 for Windows Servers Installation Log
>> >
>> >03-14-2007,22:09:46 : E:\WINNT\INSTALL\BE\setup.exe
>> >03-14-2007,22:09:46 : CSetupApp::LoadSetupXML
>> >03-14-2007,22:09:46 : CSetupApp::ScanXML
>> >03-14-2007,22:09:46 : E:\WINNT\INSTALL\BE\Bin\Setup.xml
>> >03-14-2007,22:09:46 : MSI File Name = WindowsInstaller-KB893803-v2-x86.exe
>> >03-14-2007,22:09:46 : MSI Version = 3.1
>> >03-14-2007,22:09:46 : MSI Package Name = Symantec Backup Exec for Windows
>> >Servers.msi
>> >03-14-2007,22:09:46 : System Central Processor = 86
>> >03-14-2007,22:09:46 : Product Type = SETUP_BE
>> >03-14-2007,22:09:46 : Product Name = Symantec Backup Exec for Windows Servers
>> >03-14-2007,22:09:46 : Current Installing GUID
>> >={BEA465C8-2923-42C6-9141-BE44739A6A80}
>> >03-14-2007,22:09:46 : Product Version = 11.0
>> >03-14-2007,22:09:46 : CSetupSupport::IsValidMSIPackage
>> >03-14-2007,22:09:46 : E:\WINNT\INSTALL\BE\Symantec Backup Exec for Windows
>> >Servers.msi
>> >03-14-2007,22:09:48 : {BEA465C8-2923-42C6-9141-BE44739A6A80}
>> >03-14-2007,22:09:48 : {BEA465C8-2923-42C6-9141-BE44739A6A80}
>> >03-14-2007,22:09:48 : Equal PID
>> >03-14-2007,22:09:50 : Product version: 11.0.6235
>> >03-14-2007,22:09:51 : StartBESequence
>> >03-14-2007,22:09:51 : Executing BE_PreCheckInstall
>> >03-14-2007,22:09:51 : MDAC 2.82.1830.0 is installed on this system.
>> >03-14-2007,22:09:51 : Executing BE_SetSQLxLangVersion. Setting language
>> >version of SQL Express BKUPEXEC instance.
>> >03-14-2007,22:09:51 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
>> >03-14-2007,22:09:51 : MDAC 2.82.1830.0 is installed on this system.
>> >03-14-2007,22:09:51 : Executing StartBESequence
>> >03-14-2007,22:09:51 : Pulling user data from the MSI
>> >03-14-2007,22:09:51 : Upgrade state set to 0
>> >03-14-2007,22:09:51 : Executing SSO::PullDataMSI()
>> >03-14-2007,22:09:51 : Executing TSM_GetTSMSettings.
>> >03-14-2007,22:09:51 : Executing CDlgCAS::PullDataMSI()
>> >03-14-2007,22:09:51 : /TS:
>> >03-14-2007,22:09:51 : MSI processing complete
>> >03-14-2007,22:09:51 : Pulling user data from the command line
>> >03-14-2007,22:09:51 : COMMAND LINE: Checking UIMODE value
>> >03-14-2007,22:09:51 : COMMAND LINE: Checking for program group placement
>> >value
>> >03-14-2007,22:09:51 : COMMAND LINE: Checking for main feature selection
>> >03-14-2007,22:09:51 : COMMAND LINE: Checking for serialization values
>> >03-14-2007,22:09:51 : CDlgChooseCustom::PullDataSilent
>> >03-14-2007,22:09:51 : After check for parameter file exists.
>> >03-14-2007,22:09:51 : CDlgLocalChooseCustom Pass Function.
>> >03-14-2007,22:09:51 : After Check for INSTALL_CHOICE.
>> >03-14-2007,22:09:51 : After Check for INSTALL_TYPE.
>> >03-14-2007,22:09:51 : After Check for INSTALL_MODE.
>> >03-14-2007,22:09:51 : CDlgLocalChooseCustom Pass Function.
>> >03-14-2007,22:09:52 : InitData failed to open the cluster wrapper
>> >03-14-2007,22:09:52 : InitData failed to open the cluster wrapper
>> >03-14-2007,22:09:52 : COMMAND LINE: Checking for service account values
>> >03-14-2007,22:09:52 : Not in Maintenance mode
>> >03-14-2007,22:09:52 : Getting the Silent Params.
>> >03-14-2007,22:09:52 : COMMAND LINE: checking for SSO values
>> >03-14-2007,22:09:52 : COMMAND LINE: checking for DlgChooseDBServer values
>> >03-14-2007,22:09:52 : COMMAND LINE: Checking for tape drivers values
>> >03-14-2007,22:09:52 : COMMAND LINE: Checking for TSM values
>> >03-14-2007,22:09:52 : CDlgTSMConfig Pass Function.
>> >03-14-2007,22:09:52 : After Check for INSTALL_MODE.
>> >03-14-2007,22:09:52 : CDlgTSMConfig Pass Function.
>> >03-14-2007,22:09:52 : COMMAND LINE: checking for CASO values
>> >03-14-2007,22:09:52 : COMMAND LINE: Checking for clone values
>> >03-14-2007,22:09:52 : COMMAND LINE: Checking progress settings
>> >03-14-2007,22:09:52 : COMMAND LINE: Checking for NOINSTALL value
>> >03-14-2007,22:09:52 : Setup Command Line = "E:\WINNT\INSTALL\BE\setup.exe"
>> >03-14-2007,22:09:52 : List of switches set follows:
>> >03-14-2007,22:09:52 : /DEST: = C:\Program Files\Symantec\Backup Exec\
>> >03-14-2007,22:09:52 : /TS:
>> >03-14-2007,22:09:52 : Command line processing complete
>> >03-14-2007,22:09:52 : Executing BEDiag utility
>> >03-14-2007,22:09:52 : E:\WINNT\INSTALL\BE\Bin\Bediag.exe CORBETS1
>> >/o:C:\DOCUME~1\ALLUSE~1\APPLIC~1\Symantec\BACKUP~1\Logs\Pre-Install_BEDiag.log
>> >03-14-2007,22:09:52 : BEDiag utility has been launched in asynchronous
>> >execution mode. Review
>> >C:\DOCUME~1\ALLUSE~1\APPLIC~1\Symantec\BACKUP~1\Logs\Pre-Install_BEDiag.log
>> >for results.
>> >03-14-2007,22:09:52 : Install set to run in UI mode
>> >03-14-2007,22:09:58 : Validating license data
>> >03-14-2007,22:10:01 : InitData failed to open the cluster wrapper
>> >03-14-2007,22:10:01 : m_bUseNativeClient = 1
>> >03-14-2007,22:10:01 : Executing SQL_GetSQLServerEdition.
>> >03-14-2007,22:10:01 : DRIVER={SQL Native
>> >Client};SERVER=CORBETS1\SBSMONITORING;Trusted_Connection=Yes
>> >03-14-2007,22:10:16 : V-225-206: Encryption not supported on the client.
>> >Client unable to establish connection An error has occurred while
>> >establishing a connection to the server. When connecting to SQL Server 2005,
>> >this failure may be caused by the fact that under the default settings SQL
>> >Server does not allow remote connections. ***To search for information about
>> >this error, click here
>> >03-14-2007,22:10:16 : V-225-226: Unable to connect to SQL Server. ***To
>> >search for information about this error, click here
>> >03-14-2007,22:10:16 : Executing SQL_GetSQLServerEdition.
>> >03-14-2007,22:10:16 : DRIVER={SQL Native
>> >Client};SERVER=CORBETS1\SHAREPOINT;Trusted_Connection=Yes
>> >03-14-2007,22:10:27 : V-225-206: Encryption not supported on the client.
>> >Client unable to establish connection An error has occurred while
>> >establishing a connection to the server. When connecting to SQL Server 2005,
>> >this failure may be caused by the fact that under the default settings SQL
>> >Server does not allow remote connections. ***To search for information about
>> >this error, click here
>> >03-14-2007,22:10:27 : V-225-226: Unable to connect to SQL Server. ***To
>> >search for information about this error, click here
>> >03-14-2007,22:10:27 : Executing SQL_GetSQLServerEdition.
>> >03-14-2007,22:10:27 : DRIVER={SQL Native
>> >Client};SERVER=CORBETS1\WSUS;Trusted_Connection=Yes
>> >03-14-2007,22:10:28 : V-225-206: Encryption not supported on the client.
>> >Client unable to establish connection An error has occurred while
>> >establishing a connection to the server. When connecting to SQL Server 2005,
>> >this failure may be caused by the fact that under the default settings SQL
>> >Server does not allow remote connections. ***To search for information about
>> >this error, click here
>> >03-14-2007,22:10:28 : V-225-226: Unable to connect to SQL Server. ***To
>> >search for information about this error, click here
>> >03-14-2007,22:10:52 : CDlgValidationSummary::ValidateData
>> >03-14-2007,22:10:52 : CDlgSerialNumber Pass Function.
>> >03-14-2007,22:10:52 : After Check for Remote_Install.
>> >03-14-2007,22:10:52 : After Check for RA_INSTALL.
>> >03-14-2007,22:10:55 : Validating serialization data
>> >03-14-2007,22:10:56 : CDlgLocalChooseCustom Pass Function.
>> >03-14-2007,22:10:56 : After Check for INSTALL_CHOICE.
>> >03-14-2007,22:10:56 : After Check for INSTALL_TYPE.
>> >03-14-2007,22:10:56 : After Check for INSTALL_MODE.
>> >03-14-2007,22:10:56 : CDlgLocalChooseCustom Pass Function.
>> >03-14-2007,22:10:56 : On Init of CDlgChooseCustom
>> >03-14-2007,22:10:56 : Leaving Init of CDlgChooseCustom
>> >03-14-2007,22:10:56 : CDlgLocalChooseCustom::OnInitDialog
>> >03-14-2007,22:10:56 : On Init of CDlgLocalChooseCustom
>> >03-14-2007,22:10:56 : InitData failed to open the cluster wrapper
>> >03-14-2007,22:10:56 : InitData failed to open the cluster wrapper
>> >03-14-2007,22:10:56 : Leaving Init of CDlgLocalChooseCustom
>> >03-14-2007,22:11:01 : Validating Local Options Data
>> >03-14-2007,22:11:01 : InitData failed to open the cluster wrapper
>> >03-14-2007,22:11:01 : InitData failed to open the cluster wrapper
>> >03-14-2007,22:11:01 : InitData failed to open the cluster wrapper
>> >03-14-2007,22:11:01 : InitData failed to open the cluster wrapper
>> >03-14-2007,22:11:11 : Validating service account data
>> >03-14-2007,22:11:12 : CDlgSSO Pass Function.
>> >03-14-2007,22:11:12 : After Check for INSTALL_MODE.
>> >03-14-2007,22:11:12 : DlgChooseDBServer Pass Function.
>> >03-14-2007,22:12:22 : Validating DlgChooseDBServer data
>> >03-14-2007,22:12:39 : m_bUseNativeClient = 1
>> >03-14-2007,22:14:12 : CDlgSSO Pass Function.
>> >03-14-2007,22:14:12 : After Check for INSTALL_MODE.
>> >03-14-2007,22:14:19 : Validating service account data
>> >03-14-2007,22:14:19 : CDlgLocalChooseCustom Pass Function.
>> >03-14-2007,22:14:19 : After Check for INSTALL_CHOICE.
>> >03-14-2007,22:14:19 : After Check for INSTALL_TYPE.
>> >03-14-2007,22:14:19 : After Check for INSTALL_MODE.
>> >03-14-2007,22:14:19 : CDlgLocalChooseCustom Pass Function.
>> >03-14-2007,22:14:21 : Validating Local Options Data
>> >03-14-2007,22:14:21 : InitData failed to open the cluster wrapper
>> >03-14-2007,22:14:21 : InitData failed to open the cluster wrapper
>> >03-14-2007,22:14:21 : InitData failed to open the cluster wrapper
>> >03-14-2007,22:14:21 : InitData failed to open the cluster wrapper
>> >03-14-2007,22:14:23 : Validating service account data
>> >03-14-2007,22:14:39 : CDlgSSO Pass Function.
>> >03-14-2007,22:14:39 : After Check for INSTALL_MODE.
>> >03-14-2007,22:14:39 : DlgChooseDBServer Pass Function.
>> >03-14-2007,22:15:32 : Validating DlgChooseDBServer data
>> >03-14-2007,22:15:32 : m_bUseNativeClient = 1
>> >03-14-2007,22:15:32 : There is no MSSQL$BKUPEXEC Service
>> >03-14-2007,22:15:32 : Unable to connect to a SQL Server CORBETS1\BKUPEXEC on
>> >machine CORBETS1.
>> >03-14-2007,22:16:39 : Validating DlgChooseDBServer data
>> >03-14-2007,22:17:01 : Validating DlgChooseDBServer data
>> >03-14-2007,22:17:01 : m_bUseNativeClient = 1
>> >03-14-2007,22:17:01 : There is no MSSQL$BKUPEXEC Service
>> >03-14-2007,22:17:01 : Unable to connect to a SQL Server CORBETS1\BKUPEXEC on
>> >machine CORBETS1.
>> >03-14-2007,22:23:17 : Validating DlgChooseDBServer data
>> >03-14-2007,22:23:17 : Drive C: Required: 956 MB Available: 14445 MB
>> >03-14-2007,22:23:17 : CDlgChooseTapeDrivers Pass Function.
>> >03-14-2007,22:23:17 : After Check for INSTALL_MODE.
>> >03-14-2007,22:23:17 : After Check for INSTALL_CHOICE.
>> >03-14-2007,22:23:17 : After Check for INSTALL_TYPE.
>> >03-14-2007,22:23:17 : CDlgSerialNumber Pass Function.
>> >03-14-2007,22:23:28 : CDlgTSMConfig Pass Function.
>> >03-14-2007,22:23:28 : After Check for INSTALL_MODE.
>> >03-14-2007,22:23:28 : CDlgTSMConfig Pass Function.
>> >03-14-2007,22:23:28 : CDlgCAS Pass Function.
>> >03-14-2007,22:23:28 : After Check for INSTALL_MODE.
>> >03-14-2007,22:23:28 : CDlgClone Pass Function.
>> >03-14-2007,22:23:28 : CDlgClone not passed.
>> >03-14-2007,22:23:28 : CDlgRemoteChooseCustom Pass Function.
>> >03-14-2007,22:23:28 : After Check for INSTALL_CHOICE.
>> >03-14-2007,22:23:28 : Install Summary XML File:
>> >03-14-2007,22:23:28 :
>> >C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\1\{BEA465C8-2923-42C6-9141-BE44739A6A80}\InstallReview.xml
>> >03-14-2007,22:23:28 : Install Summary XSL File:
>> >03-14-2007,22:23:28 : E:\WINNT\INSTALL\BE\Bin\InstallSummary.xsl
>> >03-14-2007,22:23:28 : Install Summary HTML File:
>> >03-14-2007,22:23:28 :
>> >C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\1\{BEA465C8-2923-42C6-9141-BE44739A6A80}\InstallReview.htm
>> >03-14-2007,22:23:28 : Entering GetSQLAndCASOInformation
>> >03-14-2007,22:23:28 : Leaving GetSQLAndCASOInformation
>> >03-14-2007,22:23:28 : MDAC 2.82.1830.0 is installed on this system.
>> >03-14-2007,22:23:28 : m_bUseNativeClient = 1
>> >03-14-2007,22:24:00 : Executing BE_InstallMDAC.
>> >03-14-2007,22:24:00 : MDAC 2.82.1830.0 is installed on this system.
>> >03-14-2007,22:24:05 : Installing .Net Framework 2.0.
>> >03-14-2007,22:24:05 : .NET Framework was detected. Skipping install.
>> >03-14-2007,22:24:06 : Installing Microsoft Report Viewer Redistributable 2005
>> >03-14-2007,22:24:06 : m_bUseNativeClient = 1
>> >03-14-2007,22:24:06 : Installing SQL Express 2005 BKUPEXEC instance.
>> >03-14-2007,22:24:06 : "E:\WINNT\INSTALL\SQLExpress\SQLEXPR.exe" /wait /qn
>> >/norestart /lv "C:\Program Files\Microsoft SQL Server\90\Setup
>> >Bootstrap\LOG\Summary.txt" INSTANCENAME=BKUPEXEC INSTALLSQLDIR="C:\Program
>> >Files\Microsoft SQL Server\" INSTALLSQLDATADIR="C:\Program Files\Microsoft
>> >SQL Server\" INSTALLSQLSHAREDIR="C:\Program Files\Microsoft SQL Server\"
>> >ADDLOCAL=SQL_Engine,SQL_Data_Files,SQL_Replication,Client_Components,Connectivity SAPWD=**** DISABLENETWORKPROTOCOLS=0
>> >03-14-2007,22:25:09 : V-225-53: ERROR: Failed to install SQL Express
>> >BKUPEXEC instance with error 1923. ***To search for information about this
>> >error, click here
>> >03-14-2007,22:25:10 : Please review C:\Program Files\Microsoft SQL
>> >Server\90\Setup Bootstrap\LOG\Summary.txt for more details.
>> >03-14-2007,22:25:10 : Failed to install third party products.
>> >
>> >I get the impression I need to reinstall SQL server'
>> >
>> >I installed using the administrator account. Thanks!!!
>> >
>> >
>> >
>> >
>> >
>>|||Heh.
> >Client unable to establish connection An error has occurred while
> >establishing a connection to the server. When connecting to SQL Server 2005,
> >this failure may be caused by the fact that under the default settings SQL
> >Server does not allow remote connections.
An extremely common problem for anyone using SQL Server 2005 on Windows 2003
SP1 or later. Search the newsgroups for anything to do with remote
connections to SQL Server, for example, the "ss2005 connection problems"
thread.
And I wouldn't touch Symantec products with a barge pole. Install/uninstall
procedures are convuluted at best, and in most cases they don't play nice
with other 3rd party products.
It's a real shame there is no easy way to create a Virtual PC of a real
server so you can dry-run a product install to see what complications there
are.

Thursday, March 29, 2012

Backup fails with A nonrecoverable I/O error occurred for large DB

Backup fails with A nonrecoverable I/O error occurred for large DB

Tuesday, March 27, 2012

backup failed

backup failed

Sunday, March 25, 2012

Backup Exec broke my SQL!

Backup Exec broke my SQL!

Sql Backing up Tables

Blog Archive

About Me